IJ Start Canon imagePROGRAF PRO-4000S

IJ Start Canon imagePROGRAF PRO-4000S

IJ Start Canon imagePROGRAF PRO-4000S

IJ Start Canon imagePROGRAF PRO-4000S – As I specified in a current post, my old extensive configuration printer has surrendered the phantom, so I’ve recently had another Canon imagePROGRAF PRO-4000 introduced, and today I will walk you through a portion of the key new highlights and give my assessment of this new printer.

Cutting straight to the chase, with my old 24″ iPF6350 breaking after only six years, for a couple of moments, I considered moving far from Canon for my vast organization printing, yet then I understood that there was another line of expansive arrangement printers that has quite recently been reported, so I chose to investigate, and was extremely energized by what I saw.

At first, I was essentially going to supplant my 6350 with the PRO-2000, which is the successor 24″ wide move media printer, yet in spite of the fact that this new scope of PRO printers are smaller, they are more than double the tallness, which implies the PRO-2000 can’t be conveyed up to my third floor studio. It basically won’t fit around the highest point of the stairs, even remained on end.

There was an alternative to have it crane lifted up to the third floor and go in through the window, however this would cost $1,500, and afterward obviously another $1,500 to have it brought down again in the event that I move, or when it definitely breaks again sooner or later what’s to come.

I assumed if I would spend another $3,000 I should put that cash towards an imagePROGRAF PRO-4000, which is the 44″ wide enormous sibling of the PRO-2000, and have that introduced on my second floor rather than up in my studio. Furthermore, when I say enormous sibling, I truly do mean BIG, as should be obvious in this photograph of me with the printer in the wake of having it introduced (beneath).

IJ Start Canon imagePROGRAF PRO-4000S Before singing the agreement, I went to the Canon S Tower here in Tokyo and made various vast prints on three kinds of Breathing Color media, and I was exceptionally content with the outcomes. Note that I did my tests on the PRO-2000, preceding I heard the cost for the crane lift, yet the 2000 and 4000 are practically indistinguishable with the exception of the width of move media that can be utilized. This additionally implies this audit will be similarly as valuable on the off chance that you are thinking about the PRO-2000 as it will for the PRO-4000.

Anyway, my PRO-4000 landed on August 9, and took four individuals to convey it up to the second floor, and put it onto its stand. I have since spent the most recent five days setting it up, making my ICC profiles, and becoming more acquainted with this delightful new bigger configuration printer from Canon.

What’s New IJ Start Canon imagePROGRAF PRO-4000S?

Before we take a gander at a few prints, we should speak a little about what’s new with the PRO-4000. All things considered, Canon have discharged another arrangement of inks for this lineup called LUCIA PRO ink, which really diminishes the quantity of hues from 12 to 11 color inks, however they included another Chroma Optimizer.

From the Canon site, I see that “LUCIA PRO ink detailing incorporates smaller scale typified colorants that empower smooth angles, an extended shading extent, and more profound shading articulation.” In numerous ways, I concur with this announcement, however I’m really not persuaded that the shading array is extended. Truth be told, for some particular circumstances utilizing matte media I’d the extent has been gotten a bit, however I’ll speak more about this later…

IJ Start Canon imagePROGRAF PRO-4000S The Chroma Optimizer is utilized when imprinting on reflexive and semi-lustrous media, and goes about as a reasonable coat, enhancing shading and improves the dull territories of sparkle prints. The new inks and Chroma Optimizer are additionally said to enhance scratch protection and diminish graininess. We’ll investigate some real prints in the blink of an eye.

I was additionally glad to find that the dark line that was constantly left on the correct underside of the prints is not any more an issue. That is something that bothered the damnation out of my about my iPF6350 and I realize this was not settled the 6450, so it’s pleasant this is at last settled.

Just a single Print Head IJ Start Canon imagePROGRAF PRO-4000S

Though my old printer had two print heads, costing around $300 each, the new PRO printer lineup utilize only one, 1.28″ wide print head with 18,432 spouts and hostile to stopping up innovation. This new print head costs around $500, so there’s a $100 sparing when that should be supplanted, expecting that you’d change the two heads on the old models obviously. Having quite recently the one head likewise empowered Canon to make the printer smaller in width, which is a decent space saver.

Having recently the one print head likewise empowered Canon to accelerate the printing impressively. A 18 x 24 inch print on my old printer used to take around 9 minutes, yet with the new PRO-4000 a similar size print takes rough 3 minutes 40 seconds.

IJ Start Canon imagePROGRAF PRO-4000S New Media Loading Mechanism

The media stacking system has additionally been completely changed. You now stack the move from the front of the printer by opening the Top Cover and the Output Guide as should be obvious in this photograph (underneath). Subsequent to dropping the media on its holder into put, you turn the move holder which directs the media up into the printer, until the point that you hear a beep, to tell you that the printer would now be able to nourish the media.

At that point, you close the two covers and press a catch the LCD show to advise the printer to simply ahead and nourish the paper. Not exclusively does this mean we don’t need to touch the paper to such an extent, we likewise now have the advantage of the paper being topsy turvy for more often than not before it’s imprinted on.

This is an advantage since it implies that tidy is less inclined to settle on the print side of the media as you print, and tidy that is now on the media, will probably tumble off, before it’s imprinted on. On the off chance that you print on clean, the tidy for the most part tumbles off as the print dries, leaving a white spec, and for the quality cognizant printer that implies that the print has be made again starting with no outside help.

Media Information Update IJ Start Canon imagePROGRAF PRO-4000S

Another extremely decent touch that I’m almost certain I couldn’t do with my old iPF6350, is that you can refresh the Media Information in the printer drivers on different PCs. Previously, on the off chance that I included a custom media write, similar to a move of Breathing Color paper, to the printer, to get that same media in the drivers on an alternate PC, I needed to utilize the Media Configuration Tool and include the media once more.

Presently, you can simply go to the printer drivers and open up the Printer Utilities, and select Media Information from the pulldown, and tap the catch to refresh the media. This at that point goes to the printer and looks at the media data on the printer, and if it’s diverse to the media that the printer drivers think about, it will refresh this data for you. It’s extremely smooth, and an exceptionally welcome element.

Wifi and Gigabit Ethernet Connectivity

The PRO arrangement of printers now additionally underpins Wifi Connectivity and the wired system interface is currently Gigabit Ethernet. We can likewise still interface with the printer with USB. You would now be able to print PDF and JPEG reports specifically from a memory stick too.

I have now printed with Wifi, LAN and USB, and observed Wifi to be a little on the moderate side for a not too bad estimated print, so I purchased a 10 meter USB link so I can print from my eating table, which truly speeded things up. Despite the fact that it’s just High Speed USB2, it’s considerably speedier than Wifi.

I additionally really purchased a 20m Ethernet link, so I can connect the PRO-4000 straightforwardly to my switch on the 3F on the off chance that I have to complete a great deal of work from the studio. With USB being so quick, I don’t know I’ll do this frequently, yet I in any event now have the alternative.

Three Sizes of Ink Tanks

Another awesome change as I would see it is the capacity to now browse three sizes of ink tanks, with 160ml, 330ml, and 700ml tanks accessible. My old iPF6350 took 130ml ink tanks, so even the littlest of the new tanks holds 30ml more ink. I could top off the new PRO-4000 with 160ml tanks, yet now having the choice to introduce bigger tanks, and blend and match the sizes, implies we can choose the tank measure in light of how rapidly the inks rundown.

The PRO-4000 accompanies an arrangement of ink cartridges holding 190ml. Before we introduced the cartridges into the printer, I took this photo for correlation (beneath). On the left is a 190ml cartridge, and on the privilege is a 700ml.

I have additionally gotten somewhere in the range of 330ml cartridges, and would incorporate one in this photograph as well, yet they are really an indistinguishable size from the 190ml cartridge you see here. The main distinction is that they aren’t as vigorously indented as this 190ml cartridge. You perceive how it is inset where it says Canon and the white mark is? The 330ml cartridges don’t go in that far, that is the main distinction.

Blend and Match Inks

In the course of the most recent six years that I’ve been utilizing my old huge configuration printer, I’ve discovered that since I complete a great deal of high contrast printing, the Matte Black and Photo Black, and the Gray inks tend to rundown the speediest, so I have purchased a 700ml tank for the Matte and Photo Blacks and the Photo Gray. So I could demonstrate to you the distinction in estimate however, I requested a 330ml Gray, for examination with the starter inks, just to discover they were a similar size, as I just specified.

I additionally purchased a 700ml tank for the Chroma Optimizer, on the grounds that I’ve heard this keeps running down before long. At somewhat more than $300 a fly for the 700ml ink tanks however, I figure I will abstain from utilizing 700ml tanks for everything except the overwhelming use blacks and grays, unless I begin to take many more consistent print arranges that is. The good thing however is that we now have this choice, and having the capacity to blend and match tank sizes is awesome!

Changing Inks on the Fly

Another extraordinary new component is that the inks are currently drawn down into a Sub-Ink Tank System, which permits the greater part of the accessible ink in a tank to be utilized before replacing it, to decrease squandered ink, even better, purge tanks would now be able to be supplanted on the fly, without ceasing the printer. I haven’t attempted this yet, however that is the thing that the documentation says. That is the review about IJ Start Canon imagePROGRAF PRO-4000S .

We proudly present IJ Start Canon imagePROGRAF PRO-4000S through ijstartcanon-setup.com that is free and safe to download.

How to Download and Install IJ Start Canon imagePROGRAF PRO-4000S

  1. Plug the power cable into the printer, then into an outlet on a surge protector. This step enable you verify that the printer is able to powered up.
  2. Make sure the printer’s ink cartridges are installed properly. Moreover, load the proper paper into the tray.
  3. Download the IJ Start Canon imagePROGRAF PRO-4000S software by clicking the download link below. Please choose the file based on your operating system.
  4. Install the driver by double-clicking the downloaded file. Make sure to install the correct drivers for your operating system.
  5. Follow the instruction shown in the installation panel.
  6. Turn the printer power off and plug the USB cable into the printer port and into the USB port on your computer.
  7. The computer is trying to recognize the printer.
  8. To make sure the printer works properly, please out a test page.
  9. If the printer is working properly, now you can use the printer to print your work

IJ Start Canon imagePROGRAF PRO-4000S Links

Windows all versions 32bit
Windows all versions 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux (RPM/DEB)

IJ Start Canon imagePROGRAF PRO-4000S